How to Clean Iron: Cleaning your iron is easy with our tips

Cleaning your iron is easy with our tips! In this article, we will provide you with the best ways to clean your iron and keep it in good condition. We’ll also give you some helpful …

white and teal steam clothes iron plugged on ironing board

Cleaning your iron is easy with our tips! In this article, we will provide you with the best ways to clean your iron and keep it in good condition. We’ll also give you some helpful hints on how to avoid damaging your iron in the future. So read on for all the information you need to get started!

The best ways to clean your iron

Dirty iron can be a pain to deal with. Not only is it unsightly, but it can also cause your clothes to look less than their best. Fortunately, there are a few simple steps you can take to clean your iron and keep it looking its best.

1) Use a mixture of vinegar and water:

This is one of the most effective ways to clean iron. Simply mix equal parts vinegar and water in a spray bottle and mist the solution onto your iron. Then, use a clean microfiber cloth to wipe away any dirt or residue.

Vinegar is a great natural cleaner that will not only remove built-up dirt and grime, but also help to prevent future build-up.

2) Baking soda and water:

Another great way to clean iron is with a mixture of baking soda and water. Simply mix together equal parts baking soda and water to form a paste. Then, apply the paste to your iron’s soleplate with a damp cloth and scrub away any dirt or residue.

Baking soda is a highly effective cleaning solution that gets rid of dust and filth. It is also non-abrasive, so it will not damage your iron.

3) Adding vinegar to the iron’s water reservoir:

If you notice that your iron is starting to get dirty, you can add vinegar to the water reservoir. This will help to clean the inside of your iron and prevent future build-up.

To do this, simply add one cup of vinegar to the water reservoir and let it sit for 30 minutes. Then, flush out the vinegar by running the iron over a clean cloth.

4) To remove melted plastic, use ice cubes and a plastic knife.

If you have melted plastic on your iron, you can remove it with ice cubes and a plastic knife. First, place the ice cubes on the melted plastic. Then, use the plastic knife to scrape away the hardened plastic in the iron plate.

Once you have removed the melted plastic, you can clean the area with a damp cloth.

5) Use acetone nail polish remover to  remove stubborn stains:

If you have stubborn stains on your iron, you can use acetone nail polish remover to remove them. Simply apply the acetone to a clean cloth and rub it onto the stained area.

The acetone will break down the stain and make it easier to wipe away.

6) Use an old toothbrush to clean hard-to-reach areas:

If you have a hard time reaching all the nooks and crannies of your iron, you can use a toothbrush to help. Simply dip the toothbrush in soapy water and scrub away any dirt or residue.

Heat the iron up and press the steam button until the steam flows out freely. The toothbrush will help to reach all the tight spaces and remove any build-up.

7) Soaked towel cleaning method:

This is a great way to clean the iron if it is especially dirty. Simply soak a towel in a mixture of vinegar and water. Then, wrap the soaked towel around your iron and let it sit for 30 minutes.

After 30 minutes, remove the towel and use a clean cloth to wipe away any dirt or residue.

8) Iron over a newspaper and salt:

If you want to clean your iron and get rid of any wrinkles, you can iron over a newspaper and salt. Simply sprinkle salt over a newspaper and then run your iron over it. You can use a brown paper bag as an alternative to the newspaper.

The salt will help to remove any dirt or residue from your iron, while the newspaper will absorb any moisture.

9) Steam holes can be cleaned out by the use of a cotton swab:

If you notice that your steam iron holes are starting to become clogged, you can clean them out with a cotton swab. Simply insert the cotton swab into the steam hole and twist it around to remove any dirt or residue.

After you have cleaned out the steam holes, you can then flush them out by running the iron over a clean cloth.

Clog steam vents will cause your iron to produce less steam. By cleaning them out on a regular basis, you can ensure that your iron is working properly.

10) Try a magic eraser for tough stains:

If you have tough stains on your iron, you can try using a magic eraser. Simply wet the magic eraser and rub your cool iron, onto the stained area.

How to avoid damaging your iron in the future

In order to avoid damaging your iron, follow these simple tips:

1) Do not leave your iron on the fabric for too long:

If you leave your iron on the fabric for too long, you can damage the fabric. This is because the heat from the iron can cause the fabric to scorch.

To avoid this, only iron the fabric for a few seconds at a time.

2) Use the correct setting for your fabric:

If you use the wrong setting on your iron, you can damage the fabric. This is because the heat from the iron can cause the fabric to scorch.

To avoid this, make sure to consult your iron’s manual and use the correct setting for your fabric.

3) Do not use harsh chemicals:

If you use harsh chemicals, such as bleach, on your iron, you can damage it. This is because the chemicals can corrode the surface of the iron.

4) Use ironing board covers:

If you use ironing board covers, you can prevent your iron from getting dirty. This is because the covers will catch any dirt or debris that falls off of the fabric.

Ironing board covers are also great for protecting your iron from scratches.

5) Cool iron before storing:

Once you have finished cleaning your iron, be sure to let it cool completely before storing it. This will help to prevent any damage to the iron and keep it in good condition.

Regular cleaning and proper storage will help to extend the life of your iron. By following these simple tips, you can keep your iron looking and working like new.